User Tools

Site Tools

Fatigue strength: PH1 steel (Sxx/ST1)

This page presents the S-N curves and fatigue limit of PH1 steel samples that underwent shot-peening, heat treatment and machining that removed allowance of 1mm (in that order), obtained using the bending tests of rotating bars with AM layers angle 45° to the axis of rotation.

Production and prost-processing conditions

Build orientation of longitudinal axis angle 45°
Position with respect to inert gas flow undefined
Post-processing shot-peening → heat treatment → machining allowance 1mm

Experimental S-N curve

Experimental method ISO1143, rotating bending test R=-1
AM layers angle 45° to axis of rotation

Wöhler curve

Fatigue limit (MPa) 693
Number of cycles to failure N N=5,0⋅1039⋅S-11,49
Stress amplitude S (MPa) S=2843⋅N-0,087

Explanation of the terms are given at the page Fatigue strength description.

This page is a part of the section DMLS/SLM: Fatigue design rules.

2.dr/ · Last modified: 2021/12/27 20:27 by soskicz

Page Tools