Publications

  1. D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, A. Vranic, S. Ciric-Kostic: “An Experimental Study on the Fatigue Response of 15-5 PH Stainless Steel Built by DMLS”, Proceedings of IX International Conference “Heavy Machinery-HM 2017”, Zlatibor, 28 June – 1 July 2017, pp.9-16 (2017) PDF
  2. Nebojsa Bogojevic, Aleksandar Vranic, Nusret Muharemovic, Nenad Drvar: “Surface Quality of Maraging Steel Parts Produced by DMLS”, Proceedings of IX International Conference “Heavy Machinery-HM 2017”, Zlatibor, 28 June – 1 July 2017,pp.D21-D26 (2017) PDF
  3. S. Ciric-Kostic, N. Bogojevic, A. Vranic, D. Croccolo, M. De Agostinis, S. Fini, G. Olmi: “Machining and Heat Treatment Effects on the Fatigue Properties of Maraging Steel Produced by DMLS”, Proceedings of IX International Conference “Heavy Machinery-HM 2017”, Zlatibor, 28 June – 1 July 2017, pp.D27-D36 (2017) PDF
  4. Zlatan Soskic, Simona Montanari, Gian Luca Monti, Michele Monti: “A Heuristic Approach to the Estimation of the Mass of the Waste Powder During Selective Laser Sintering of Polyamide PA2200”, Proceedings of IX International Conference “Heavy Machinery-HM 2017”, Zlatibor, 28 June – 1 July 2017, pp.D37-D44 (2017) PDF
  5. D. Croccolo, M. de Agostinis, S. Fini, G. Olmi, N. Bogojević and S. Ćirić Kostić, “Effect of machining and heat treatment on the fatigue properties of Maraging steel MS1 manufactured by DMLS”, 3rd International Symposium on Fatigue Design and Material Defects, 19-22 September 2017, Lecco (Italy), Book of Abstracts  p.55 (2017) PDF
  6. D. Croccolo, M. de Agostinis, S. Fini, G. Olmi, A. Vranić and S. Ćirić Kostić, “A two-factor experimental study of on the fatigue properties of 15-5 PH stainless steel obtained by powder bed laser fusion”, 3rd International Symposium on Fatigue Design and Material Defects, 19-22 September 2017, Lecco (Italy), Book of Abstracts p.60 (2017) PDF
  7. Croccolo D, De Agostinis M, Fini S, Olmi G, Bogojevic N, Ciric-Kostic, S: “Effects of build orientation and thickness of allowance on the fatigue behaviour of 15–5 PH stainless steel manufactured by DMLS”, Fatigue & Fracture of Engineering Materials & Structures, DOI  – 10.1111/ffe.12737
  8. Croccolo, Dario, Massimiliano De Agostinis, Stefano Fini, Giorgio Olmi, Francesco Robusto, Snežana Ćirić Kostić, Aleksandar Vranić, and Nebojša Bogojević. “Fatigue Response of As-Built DMLS Maraging Steel and Effects of Aging, Machining, and Peening Treatments.” Metals 8, no. 7 (2018): 505. PDF
  9. Dario Croccolo, Massimiliano De Agostinis, Stefano Fini, Giorgio Olmi, Francesco Robusto, Snežana Ćirić-Kostić, Aleksandar Vranić, Nusret Muharemović and Nebojša Bogojević. “Fatigue Response of As-Built DMLS Maraging Steel and Effects of Machining, Heat and Surface Treatments.” In Proceedings of the 6th International Conference Integrity-Reliability-Failure (IRF 2018), Lisbon, Portugal, pp. 951-970. 2018. PDF
  10. Dario Croccolo, Massimiliano De Agostinis, Stefano Fini, Giorgio Olmi, Francesco Robusto, Nusret Muharemović, Nebojša Bogojević Aleksandar Vranić, and Snežana Ćirić-Kostić. “Experimental study on the sensitivity of DMLS manufactured Maraging Steel fatigue strength to the build orientation and allowance for machining.” In Proceedings of the 6th International Conference Integrity-Reliability-Failure (IRF 2018), Lisbon, Portugal, pp. 971-986. 2018. PDF
  11. Croccolo, Dario, Massimiliano De Agostinis, Stefano Fini, Giorgio Olmi, Nebojsa Bogojevic, and Snezana Ciric-Kostic. “How Build Orientation and Thickness of Allowance May Affect The Fatigue Response of DMLS Produced 15-5 PH Stainless Steel.” In Proceedings of the 6th International Conference Integrity-Reliability-Failure (IRF 2018), Lisbon, Portugal, pp. 987-996. 2018. PDF
  12. Snežana Ćirić Kostić, Jelena Tomić, Tommaso Brugo, Nenad Drvar, “Primena optičke DIC merne metode na projektu A_MADAM”, Industrija, Vol. 77, pp 12-14 (2018) PDF
  13. A. Vranić, N. Bogojević, S. Ćirić Kostić, D. Croccolo, G. Olmi: „Advantages and Drawbacks of Additive Manufacturing“, IMK-14 – Research & Development in Heavy Machinery 23(2017)2, EN57-62 PDF
  14. Croccolo D, De Agostinis M, Fini S, Olmi G, Robusto F, Ciric-Kostic S, Vranic A, Muharemovic N, Bogojevic N. Effects of Machining and Heat and Surface Treatments on as Built DMLS Processed Maraging Steel. In International Conference on Theoretical, Applied and Experimental Mechanics 2018 Jun 17 (pp. 110-111). Springer, Cham. DOI: 10.1007/978-3-319-91989-8_24
  15. Croccolo D, De Agostinis M, Fini S, Olmi G, Robusto F, Muharemovic N, Bogojevic N, Vranic A, Ciric-Kostic S. DMLS Built Maraging Steel Fatigue Response Investigated for Different Build Orientations and Allowance for Machining. InInternational Conference on Theoretical, Applied and Experimental Mechanics 2018 Jun 17 (pp. 112-113). Springer, Cham. DOI: 10.1007/978-3-319-91989-8_25
  16. Croccolo, D., De Agostinis, M., Fini, S., Olmi, G., Robusto, F., Ćirić‐Kostić, S., Morača, S. and Bogojević, N., 2019. Sensitivity of direct metal laser sintering Maraging steel fatigue strength to build orientation and allowance for machining. Fatigue & Fracture of Engineering Materials & Structures42(1), pp.374-386. DOI  – 10.1111/ffe.12917
  17. Šoškić, Z., Monti, G.L., Montanari, S., Monti, M. and Cardu, M., 2019. Production cost model of the multi-jet-fusion technology. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, p.0954406219837300. DOI: 10.1177/0954406219837300
  18. Balos, S., Rajnovic, D., Sidjanin, L., Kostic, S. C., Bogojevic, N., Pecanac, M., & Pavlicevic, J. (2019). Knoop hardness optimal loading in measuring microhardness of maraging steel obtained by selective laser melting. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406219841081. DOI: 10.1177/0954406219841081
  19. Balos, S., Rajnovic, D., Sidjanin, L., Eric Cekic, O., Moraca, S., Trivkovic, M., & Dedic, M. (2019). Vickers hardness indentation size effect in selective laser melted MS1 maraging steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406219892301. DOI: 10.1177/0954406219892301
  20. Zlatan Šoškić, Jelena Tomić, Nenad Drvar, Michele Monti, Marco Cardu: “Application of artificial neural networks for estimation of the mass of the waste powder during selective laser sintering”, Proceedings of 8th International Conference “Mechanics and Materials in Design – M2D 2019”, Bologna /Italy), 4 – 6 September 2019, pp.29-30 (2019) PDF
  21. Ivo Campione, Tommaso Maria Brugo, Giangiacomo Minak, Josip Kos, Jelena Janković Tomić,Snežana Ćirić-Kostić: “Investigation of mixed mode I and II fracture mechanical behaviour of SLS printed IASCB specimens by digital image correlation”, Proceedings of 8th International Conference “Mechanics and Materials in Design – M2D 2019”, Bologna /Italy), 4 – 6 September 2019, pp.69-70 (2019) PDF
  22. Nebojša Bogojević, Nusret Muharemović, Branko Radičević, Aleksandar Vranić and Snežana Ćirić Kostić: “Air flow resistance of polyamide 12 made by selective laser sintering”, Proceedings of 8th International Conference “Mechanics and Materials in Design – M2D 2019”, Bologna /Italy), 4 – 6 September 2019, pp.163-164 (2019) PDF
  23. Bogojević N., Ćirić-Kostić S., Vranić A., Olmi G., Croccolo D. (2020) Influence of the Orientation of Steel Parts Produced by DMLS on the Fatigue Behaviour. In: Wang L., Majstorovic V., Mourtzis D., Carpanzano E., Moroni G., Galantucci L. (eds) Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-46212-3_22 PDF
  24. Campione, Ivo, Tommaso Maria Brugo, Giangiacomo Minak, Jelena Janković Tomić, Nebojša Bogojević, and Snežana Ćirić Kostić. “Investigation by digital image correlation of mixed mode i and ii fracture behavior of metallic IASCB specimens with additive manufactured crack-like notch.” Metals 10, no. 3 (2020): 400. PDF
  25. Brugo, Tommaso Maria, Ivo Campione, and Giangiacomo Minak. “Investigation by Digital Image Correlation of Mixed-Mode I and II Fracture Behavior of Polymeric IASCB Specimens with Additive Manufactured Crack-Like Notch.” Materials 14, no. 5 (2021): 1084. link